SWITCH-N-GO Gooseneck Truck Body Body For Sale

New CM SK Flatbed body only, 7' long x 84 inch wide, 40 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2FTB, 2RTB, 2.5" 24k rear hitch, color: Black. Mfg part # SK-01844038. Weighs approx 937 lbs. Serial # KC00411340. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 1998-2016Axle Type: Single Wheel Short BedHeadache Rack height: 45.5 inch--- OR ---Make: Ram (Dodge)Years: 2002-EarlierAxle Type: Single Wheel Short BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM SK MODEL:- All steel frame construction- Full length skirt w rolled fenders & ATP trim- Qty 4* Toolboxes (recessed, lockable, T-handle latches, 2 on each side)   --*Some 7' beds only have a total of 2 boxes- Tread plate deck- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM ALSK Flatbed body only, 8.5' long x 97 inch wide, 56 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2FTB, 2RTB, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALSK-02975642. Weighs approx 741 lbs. Serial # MV00411344. Will this bed fit my truck?  This is the standard recommendation for a:Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually (bed delete)Headache Rack height: 45.5 inchNote: Bed will be wider than needed but will work. Meaure to compare. **When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALSK MODEL:Aluminum full length skirt w rolled fenders & ATP trimSteel frame constructionQty 4* Aluminum Toolboxes (recessed, lockable, T-handle latches, 2 on each side *Some 7' beds only have a total of 2 boxes)Extruded aluminum deckIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. NOS Switch N Go SNG Flatbed body only, 11' long x 96 inch wide, N/A inch cab to axle, N/A inch frame rail width, Dump Body with Drop Sides - 18" Cab shield, (4) corner D-rings, 10 GA Floor, 12" Contractor Fold Down Side Height & 24" Tailgate Height, Sides: 12 GA Sheet, Tailgate: 2" X 2" X 3/16" Tubing & 10 GA Sheet, Bulkhead: Inside Height 39" For 48" High Truck Cabs, Crossmembers: 3" Structural Channel 16" on Center, Top Rail: 3" X 3" X 1/8" Tubing, Volume: 3.1 Cubic Yards, Powdura OneCure Zinc Epoxy Primer & Super Durable TGIC Topcoat. Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # 6944811 DB-11-DS. Weighs approx 1956 lbs. Serial # 3325201. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. NOS BWISE Bri-Mar_DI-100 Flatbed body only, 8' long x 64 inch wide, N/A inch cab to axle, N/A inch frame rail width, Long bed Dump Insert w Cab Protector, Tarp kit, 1 pc tailgate, 2 cu yd cap, 6k GVW, 12 Gauge Steel Floor, 17 inch Fixed Sides (14 Gauge), Stake Pockets Integrated into Side Rails, Power Unit w/ 20' Remote, Power Up / Power Down, 4 inch Hydraulic Cylinder w/ Hoist, Durable Powder Coat Primer & Durable Powder Coat Finish, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # DI-100-8. Weighs approx 770 lbs. Serial # 120169. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. AS IS CM PLS Flatbed body only, 12' long x 96 inch wide, N/A inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), PLS, Steel platform body w Wood deck, Small sides w internal stake pockets, No hitches, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # PLS-129634-S. Weighs approx 1285 lbs. Serial # MI00393683. STANDARD FEATURES FOR CM PLS MODEL:All Steel Frame Construction3” Steel Roll-Formed 3/16” Channel Crossmembers on 18” Centers4” Structural Steel Channel Frame RailsFormed 1/8” Steel Tread Plate Deck with One Piece Sides and Top DeckModular Sealed Wiring HarnessHeavy Duty Bolt on Bulkhead (41” Off Deck) with Plasma Cut Easy View Window Grill (Ship Through Corners Standard)Side Stake Pockets Integrated Into DeckRubber Mounted LED Clearance Lights (Tail, Stop, Turn and Reverse Lights Not Included) Integrated Side Stake PocketsRub Rail 3” X 3/8” with Stake Pockets on Rear OnlyPremium TGIC Polyester Powdercoat Finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. AS IS CM PLS Flatbed body only, 12' long x 96 inch wide, N/A inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), PLS, Steel platform body w Wood deck, Small sides w internal stake pockets, No hitches, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # PLS-129634-S. Weighs approx 1285 lbs. Serial # MI00393396. STANDARD FEATURES FOR CM PLS MODEL:All Steel Frame Construction3” Steel Roll-Formed 3/16” Channel Crossmembers on 18” Centers4” Structural Steel Channel Frame RailsFormed 1/8” Steel Tread Plate Deck with One Piece Sides and Top DeckModular Sealed Wiring HarnessHeavy Duty Bolt on Bulkhead (41” Off Deck) with Plasma Cut Easy View Window Grill (Ship Through Corners Standard)Side Stake Pockets Integrated Into DeckRubber Mounted LED Clearance Lights (Tail, Stop, Turn and Reverse Lights Not Included) Integrated Side Stake PocketsRub Rail 3” X 3/8” with Stake Pockets on Rear OnlyPremium TGIC Polyester Powdercoat Finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. AS IS CM PLS Flatbed body only, 12' long x 96 inch wide, N/A inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), PLS, Steel platform body w Wood deck, Small sides w internal stake pockets, No hitches, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # PLS-129634-S. Weighs approx 1285 lbs. Serial # MI00393684. STANDARD FEATURES FOR CM PLS MODEL:All Steel Frame Construction3” Steel Roll-Formed 3/16” Channel Crossmembers on 18” Centers4” Structural Steel Channel Frame RailsFormed 1/8” Steel Tread Plate Deck with One Piece Sides and Top DeckModular Sealed Wiring HarnessHeavy Duty Bolt on Bulkhead (41” Off Deck) with Plasma Cut Easy View Window Grill (Ship Through Corners Standard)Side Stake Pockets Integrated Into DeckRubber Mounted LED Clearance Lights (Tail, Stop, Turn and Reverse Lights Not Included) Integrated Side Stake PocketsRub Rail 3” X 3/8” with Stake Pockets on Rear OnlyPremium TGIC Polyester Powdercoat Finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. AS IS CM PLS Flatbed body only, 12' long x 96 inch wide, N/A inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), PLS, Steel platform body w Wood deck, Small sides w internal stake pockets, No hitches, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # PLS-129634-S. Weighs approx 1285 lbs. Serial # MI00393685. STANDARD FEATURES FOR CM PLS MODEL:All Steel Frame Construction3” Steel Roll-Formed 3/16” Channel Crossmembers on 18” Centers4” Structural Steel Channel Frame RailsFormed 1/8” Steel Tread Plate Deck with One Piece Sides and Top DeckModular Sealed Wiring HarnessHeavy Duty Bolt on Bulkhead (41” Off Deck) with Plasma Cut Easy View Window Grill (Ship Through Corners Standard)Side Stake Pockets Integrated Into DeckRubber Mounted LED Clearance Lights (Tail, Stop, Turn and Reverse Lights Not Included) Integrated Side Stake PocketsRub Rail 3” X 3/8” with Stake Pockets on Rear OnlyPremium TGIC Polyester Powdercoat Finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. AS IS CM PLS Flatbed body only, 12' long x 96 inch wide, N/A inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), PLS, Steel platform body w Wood deck, Small sides w internal stake pockets, No hitches, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # PLS-129634-S. Weighs approx 1285 lbs. Serial # MI00393686. STANDARD FEATURES FOR CM PLS MODEL:All Steel Frame Construction3” Steel Roll-Formed 3/16” Channel Crossmembers on 18” Centers4” Structural Steel Channel Frame RailsFormed 1/8” Steel Tread Plate Deck with One Piece Sides and Top DeckModular Sealed Wiring HarnessHeavy Duty Bolt on Bulkhead (41” Off Deck) with Plasma Cut Easy View Window Grill (Ship Through Corners Standard)Side Stake Pockets Integrated Into DeckRubber Mounted LED Clearance Lights (Tail, Stop, Turn and Reverse Lights Not Included) Integrated Side Stake PocketsRub Rail 3” X 3/8” with Stake Pockets on Rear OnlyPremium TGIC Polyester Powdercoat Finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

2022 Bradford Built BB-4BOX-84-84-MC 7 SNGL WHL SHORTBED DODGE, Flat Bed Body Trailer, , NEW PICKUP FLATBED FOR TRUCK FOR SALE, BRADFORD BUILT STEEL 4 BOX UTILITY FLATBED, 84" X 84", 42" FRAME WIDTH, 38" CAB TO AXLE, FITS A SINGLE WHEEL SHORT BED TRUCK, SPECIFICALLY MADE TO FIT DODGE SHORTBED PICKUPS, REAR 2-1/2" RECEIVER HITCH, GOOSENECK HITCH, LED LIGHTS, LIGHTED HEADACHE RACK, 4" DROP DOWN SIDES, 4 TOOLBOXES, ONE IN EACH CORNER, 1/8" STEEL TREADPLATE FLOOR, ZINC PRIMER, BLACK POWDERCOAT.Steel, 7 x 7.00 x

2024 FUTURE LINE, 9.4 FT, Medium Duty Trucks - Truck Bodies Only - Flatbed, , , NEW Future Line 9'4" x 100" wide Aluminum Rancher Body with Chamfered Rear Corners - 1 3/4" Extruded Aluminum Floor - .125 Smooth Aluminum Rear Apron with LED Stop, Turn, Tail Lights - 30,000 lb. B&W Turnoverball Gooseneck Hitch - Tapered Bulkhead with Screen Window and Integrated STT Lights - 3" x 3/8" Tie rail with 2" x 4" Stake Pockets on 24" Centers - For 60" CA Dual Rear Wheel Truck **COMING IN - ON ORDER**, Horse Power, Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN

2024 FUTURE LINE, 7.5 FT, Medium Duty Trucks - Truck Bodies Only - Flatbed, , , NEW Future Line 7'4" x 84" wide Aluminum Rancher Body with Chamfered Rear Corners - 1 3/4" Extruded Aluminum Floor - .125 Smooth Aluminum Rear Apron with LED Stop, Turn, Tail Lights - 30,000 lb. B&W Turnoverball Gooseneck Hitch - Tapered Bulkhead with Screen Window and Integrated STT Lights - 3" x 3/8" Tie rail with 2" x 4" Stake Pockets on 24" Centers - For 42" CA Single Rear Wheel Truck, Horse Power, Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN

2024 FUTURE LINE, 8.5 FT, Medium Duty Trucks - Truck Bodies Only - Flatbed, , , NEW Future Line 8'6" x 84" wide Aluminum Rancher Body with Chamfered Rear Corners - 1 3/4" Extruded Aluminum Floor - .125 Smooth Aluminum Rear Apron with LED Stop, Turn, Tail Lights - 30,000 lb. B&W Turnoverball Gooseneck Hitch - Tapered Bulkhead with Screen Window and Integrated STT Lights - 3" x 3/8" Tie rail with 2" x 4" Stake Pockets on 24" Centers - For 56" CA Single Rear Wheel Truck, Horse Power, Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN

2024 CADET, 6.5 FT, Light Duty Trucks - Truck Bodies Only, , , NEW Cadet Western 6'6" x 84" wide Steel Flatbed - 12 GA. Treadplate Steel Floor - Gooseneck Compartment with 30,000lb. Ball and Trap Door - Structural Channel Crossmembers and Longsills - 40" Rolled Tube Bulkhead with Sunshade - Open Tie Rail with Stake Pockets - Rear Skirt with License Plate Bracket, LED Taillights and Backup Lights - 5" Structural Channel Rear Step. - For 38"- 42" CA SRW Truck, Horse Power, Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN

2024 FUTURE LINE, 9.4 FT, Medium Duty Trucks - Truck Bodies Only - Flatbed, , , NEW Future Line 9'4" x 96" wide Aluminum Rancher Body with Chamfered Rear Corners - 1 3/4" Extruded Aluminum Floor with 4 Recessed D-Rings - Treadplate Aluminum Rear Skirt with Recessed LED Stop, Turn, Tail Lights - 4" Drop Down Sides - 30,000 lb. B&W Turnoverball Gooseneck Hitch - Tapered Bulkhead with Screen Window and Integrated STT Lights - For 60" CA Dual Rear Wheel Truck **COMING IN - ON ORDER**, Horse Power, Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN