New 2024 FORD Bucket Truck - Boom Truck
F550
Stock # 23182-9
<p>VST40MHI on Ford F550 4x4</p><p>We are pleased to quote the <strong>VERSALIFT VST-40-MHI</strong>, insulated 40 ft. 4 in. (12.3 m) telescopic aerial platform lift, 45 ft. 4 in. (13.8 m) working height, 30 ft. 2 in. (9.2 m) horizontal reach including the following items (based on a 40” frame height):</p><p><strong>ARIAL LIFT SPECIFICATIONS:</strong><br> </p><p><strong>PLATFORM </strong>– The closed fiberglass platform is 24 In. x 30 In. x 42 In. deep (.61 m x .76 m x 1.07 m) with an inside and outside step for easy access. The platform capacity is 400 lbs. (181 kg) with the jib and winch installed and 500 lbs. (227 kg) with the jib and winch removed. The platform is equipped with a tubular rubber rest/support. </p><p><strong>PLATFORM LINER AND VINYL COVER </strong>– A 50 kV rated liner and soft vinyl cover are supplied for the platform. </p><p><strong>PERSONNEL RESTRAINT SYSTEM </strong>– An Arc flash rated safety harness and lanyard are supplied. The anchor for the lanyard is attached to the platform support.</p><p><strong>SINGLE STICK UPPER CONTROL </strong>– The full pressure single-stick upper control includes a safety trigger to prevent inadvertent operation. The lift movements correspond with control handle movements. An emergency stop and a tool selector control are located at the upper controls.</p><p><strong>TRUGUARD™ 2.0 </strong>– This advance upper controls isolation system provides 4″ of electrical isolation from the entire upper controls, including the control dash panel. This system also includes a protective shield which helps prevent environmental and work-related contaminants from making direct contact with the isolating surfaces. </p><p><strong>HYDRAULIC PLATFORM ROTATION </strong>– A hydraulic rotary actuator, operated by a control lever, rotates the platform 180° from one side of the boom, to the end-hung position, and to the other side of the boom. </p><p><strong>HYDRAULIC PLATFORM LEVELING </strong>– A master and slave cylinder controls platform leveling. The leveling system can be operated from the upper or lower controls to adjust platform leveling, tilt the platform for clean out, or to ease the removal of an injured operator.</p><p><strong>HYDRAULIC TOOL CIRCUIT AT THE PLATFORM </strong>– This system is intended for open center hydraulic tools. The tool circuit provides 6 gpm (22.7 lpm). A pressure reducing valve in the tool circuit limits the tool pressure. The valve can be adjusted from 1000 to 2500 psi (70 to 175 kg/cm2). Includes quick disconnect fittings.</p><p><strong>LINE-LIFTING SOCKET </strong>– Built as part of the platform support structure, is a vertical line-lifting socket for 3 in. (76 mm) diameter line-lifting attachments. The socket is automatically leveled with the platform without any manual adjustments.</p><p>Call for more Info.</p><p> </p><p> </p>