Saved

Sell

Search

Gooseneck Truck Body Body For Sale

Looking to buy a 9.5 Ft gooseneck truck body? Browse our extensive inventory of new and used 9.5 Ft gooseneck truck body from local dealers and private sellers. Compare prices, models, trims, options and specifications between different gooseneck truck bodies on Commercial Truck Trader.
close
38

Suggested Listings

2024 CM SK in Sycamore, IL
$7,210

New 2024 CM Flatbed Body Only

SK
Stock # 411340
New CM SK Flatbed body only, 7' long x 84 inch wide, 40 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2FTB, 2RTB, 2.5" 24k rear hitch, color: Black. Mfg part # SK-01844038. Weighs approx 937 lbs. Serial # KC00411340. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 1998-2016Axle Type: Single Wheel Short BedHeadache Rack height: 45.5 inch--- OR ---Make: Ram (Dodge)Years: 2002-EarlierAxle Type: Single Wheel Short BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM SK MODEL:- All steel frame construction- Full length skirt w rolled fenders & ATP trim- Qty 4* Toolboxes (recessed, lockable, T-handle latches, 2 on each side)   --*Some 7' beds only have a total of 2 boxes- Tread plate deck- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 CM ALSK in Sycamore, IL
$9,168

New 2024 CM Flatbed Body Only

ALSK
Stock # 411344
New CM ALSK Flatbed body only, 8.5' long x 97 inch wide, 56 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2FTB, 2RTB, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALSK-02975642. Weighs approx 741 lbs. Serial # MV00411344. Will this bed fit my truck?  This is the standard recommendation for a:Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually (bed delete)Headache Rack height: 45.5 inchNote: Bed will be wider than needed but will work. Meaure to compare. **When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALSK MODEL:Aluminum full length skirt w rolled fenders & ATP trimSteel frame constructionQty 4* Aluminum Toolboxes (recessed, lockable, T-handle latches, 2 on each side *Some 7' beds only have a total of 2 boxes)Extruded aluminum deckIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 CM RD in Sycamore, IL
$4,388

Used 2024 CM Flatbed Body Only

RD
Stock # 414188
 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. AS IS CM RD Flatbed body only, 8.5' long x 97 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), AS IS - TC, 2.5" 24k rear hitch, Discounted for minor shipping damage to tailboard skirt (gouges)., color: Black. Mfg part # RD-02975842. Weighs approx 972 lbs. Serial # MB00414188. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 Hillsboro 3500 Series in Sycamore, IL
$6,661

New 2024 Hillsboro Flatbed Body Only

3500 Series
Stock # 67237
New Hillsboro 3500 Series Flatbed body only, 7' long x 81 inch wide, 40 inch cab to axle, 38 inch frame rail width, Adj inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - 3500 Series, Ford, 2 Boxes, Adjustable frame rails 38/42, Adj HR, 45 degree corners, GN & BP Hitches, color: Aluminum. Mfg part # 77404 ALT81-86-38-40 2 Box. Weighs approx 730 lbs. Serial # 67237. STANDARD FEATURES FOR HILLSBORO 3500 SERIES:3 Year Warranty,Corrosion resistant,Supersize Storage Compartments,Toolboxes have weather-resistant EPDM closed-cell foam seal,Toolboxes and skirting made of .125 thickness aluminum,Latches are polished stainless steel with key-locking 'T' handle,B&W Compatible/Ready to accept optional Hillsboro B&W Conversion Kit (Optional),30K Gooseneck ball plate with flush mount cover (2 5/16 inch 30K ball included),18K Receiver Hitch with 2 1/2 inch tube (2 inch Adapter included),High Strength Aluminum Extruded Floor,Heavy Duty Tread Brite Tailboard,3 inch Aluminum I-beam crossmembers with approximate 16 inch spacing,Heavy Duty 6 inch tall extruded rubrail,Heavy Duty adjustable height headache rack with square tube louvers,4 inch x 2 inch tube steel long rails adjustable to 34 inch, 38 inch, 42 inch frame,Recessed aluminum castings for taillights and tag,Tapered rear with step,Tapered front on 96 inch wide dual wheel beds,3 inch Extruded tie rail w/ stake pockets,LED lights (6) stop, turn & tail and (4) back-up, LED clearance & side marker lights,Sealed wiring harness with plug-in connections,Lights and harness installed. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotraile
Rondo Enterprises
Sycamore, IL
2024 J&I NS in Sycamore, IL
$3,315

New 2024 J&I Flatbed Body Only

NS
Stock # J32378
New J&I NS Flatbed body only, 7' long x 82 inch wide, 42 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Smooth sides (No rubrail), LED oval lights w harness, Std tail w Receiver hitch, GN box (no ball), Bed will fit 38-42" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I NS. Weighs approx Unknown lbs. Serial # J32378. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- SHORT bed (6.5' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I NS in Sycamore, IL
$3,315

New 2024 J&I Flatbed Body Only

NS
Stock # J32376
New J&I NS Flatbed body only, 7' long x 82 inch wide, 42 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Smooth sides (No rubrail), LED oval lights w harness, Std tail w Receiver hitch, GN box (no ball), Bed will fit 38-42" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I NS. Weighs approx Unknown lbs. Serial # J32376. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- SHORT bed (6.5' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I NS in Sycamore, IL
$3,345

New 2024 J&I Flatbed Body Only

NS
Stock # J32386
New J&I NS Flatbed body only, 8.5' long x 82 inch wide, 56 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Smooth sides (No rubrail), LED oval lights w harness, Std tail w Receiver hitch, GN box (no ball), Bed will fit 38-42" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I NS. Weighs approx Unknown lbs. Serial # J32386. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8' long)- 38 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I NS in Sycamore, IL
$3,345

New 2024 J&I Flatbed Body Only

NS
Stock # J32382
New J&I NS Flatbed body only, 8.5' long x 82 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Smooth sides (No rubrail), LED oval lights w harness, Std tail w Receiver hitch, GN box (no ball), Bed will fit 38-42" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I NS. Weighs approx Unknown lbs. Serial # J32382. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I NS in Sycamore, IL
$3,345

New 2024 J&I Flatbed Body Only

NS
Stock # J32385
New J&I NS Flatbed body only, 8.5' long x 82 inch wide, 56 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Smooth sides (No rubrail), LED oval lights w harness, Std tail w Receiver hitch, GN box (no ball), Bed will fit 38-42" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I NS. Weighs approx Unknown lbs. Serial # J32385. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8' long)- 38 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I NS in Sycamore, IL
$3,345

New 2024 J&I Flatbed Body Only

NS
Stock # J32381
New J&I NS Flatbed body only, 8.5' long x 82 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Smooth sides (No rubrail), LED oval lights w harness, Std tail w Receiver hitch, GN box (no ball), Bed will fit 38-42" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I NS. Weighs approx Unknown lbs. Serial # J32381. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I NS in Sycamore, IL
$3,925

New 2024 J&I Flatbed Body Only

NS
Stock # J32390
New J&I NS Flatbed body only, 9.3' long x 96 inch wide, 60 inch cab to axle, 34 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Smooth sides (No rubrail), LED oval lights w harness, Std tail w Receiver hitch, GN box (no ball), Bed will fit 56-58" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I NS. Weighs approx Unknown lbs. Serial # J32390. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I NS in Sycamore, IL
$3,345

New 2024 J&I Flatbed Body Only

NS
Stock # J32383
New J&I NS Flatbed body only, 8.5' long x 82 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Smooth sides (No rubrail), LED oval lights w harness, Std tail w Receiver hitch, GN box (no ball), Bed will fit 38-42" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I NS. Weighs approx Unknown lbs. Serial # J32383. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I NS in Sycamore, IL
$3,345

New 2024 J&I Flatbed Body Only

NS
Stock # J32379
New J&I NS Flatbed body only, 8.5' long x 82 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Smooth sides (No rubrail), LED oval lights w harness, Std tail w Receiver hitch, GN box (no ball), Bed will fit 38-42" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I NS. Weighs approx Unknown lbs. Serial # J32379. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I NS in Sycamore, IL
$3,345

New 2024 J&I Flatbed Body Only

NS
Stock # J32380
New J&I NS Flatbed body only, 8.5' long x 82 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Smooth sides (No rubrail), LED oval lights w harness, Std tail w Receiver hitch, GN box (no ball), Bed will fit 38-42" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I NS. Weighs approx Unknown lbs. Serial # J32380. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 Hillsboro 4000 Series in Sycamore, IL
$9,517

New 2024 Hillsboro Flatbed Body Only

4000 Series
Stock # 67243
New Hillsboro 4000 Series Flatbed body only, 8.5' long x 96 inch wide, 58 inch cab to axle, 42 inch frame rail width, Adj inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - 4000 Series, RAM, 4 Boxes, Fold down sides, Adjustable frame rails 38/42, Adj HR, 45 degree corners, GN & BP Hitches, color: Aluminum. Mfg part # 77433 ALT96-102-42-ra-4Box-4000 F/G RAM. Weighs approx 925 lbs. Serial # 67243. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR HILLSBORO 4000 SERIES:3 Year Warranty,Corrosion resistant,Supersize Storage Compartments,Toolboxes have weather-resistant EPDM closed-cell foam seal,Toolboxes and skirting made of .125 thickness aluminum,Latches are polished stainless steel with key-locking 'T' handle,B&W Compatible/Ready to accept optional Hillsboro B&W Conversion Kit (Optional),30K Gooseneck ball plate with flush mount cover (2 5/16 inch 30K ball included),18K rated 2 1/2 inch receiver tube (2 inch adapter included),High Strength Aluminum Extruded Floor,Heavy Duty Tread Brite tailboard,3 inch Aluminum I-beam crossmembers with approximate 16 inch spacing,Heavy Duty 6 inch tall extruded rubrail,Recessed stainless steel flip up tie downs,Heavy Duty adjustable height headache rack with square tube louvers,4 inch x 2 inch tube steel long rails adjustable to 34 inch, 38 inch, 42 inch frame,6 inch Fold down side rails,Recesses aluminum castings for taillights and tag,Tapered rear with step,Tapered front on 96 inch wide dual wheel beds,LED lights (6) stop, turn & tail and (4) back-up, LED clearance & side marker lights,Sealed wiring harness with plug-in connections,Lights and harness installed,Aluminum fuel door. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be req
Rondo Enterprises
Sycamore, IL
Purchase In Progress
Another customer has started purchasing this motorcycle. By providing your information below, we can let you know if this motorcycle becomes available again.
Please enter a valid first name.
Please enter a valid last name.
Please enter a valid email.
Please enter a valid phone number.
By using this site, you agree to our Terms of Use & our Privacy Policy.

Top Available Cities with Inventory

Disclaimers

Commercial Truck Trader Disclaimer: The information provided for each listing is supplied by the seller and/or other third parties. CommercialTruckTrader.com is not responsible for the accuracy of the information. Please refer to the Commercial Truck Trader Terms of Use for further information.